Giỏ hàng

Foam Makers

Thương hiệu: Chemguard
|
Loại: Khác
|
0₫

Designed as air aspirating discharge devices, Chemguard foam makers are used principally for the protection of dikes, open floating-roof storage tanks, and rim seals, and where low-velocity foam streams are desired.  Foam makers generally are installed in the line of a semi-fixed or fixed foam fire-protection system, mounted either horizontally or vertically.

UL Listed, Chemguard's foam makers feature all-brass construction for use in harsh and corrosive environments. Foam maker air inlets are covered with stainless steel mesh, and the foam makers are supplied with standard NPT threaded inlets and outlets.

1. High Back Pressure Foam Makers

The Chemguard High Back-Pressure Foam Maker (CFM) is designed to produce expanded foam that is introduced into a cone roof storage tank by sub-surface injection. The sub-surface method should only be used on tanks containing standard hydro carbon based fuels such as: diesel, kerosene, gasoline, etc.  It is not suitable for use on tanks that contain alcohols or polar solvent type liquids that are miscible in water. The foam maker is normally installed in a dedicated fire protection line or the tank product line and is generally located outside the dike area that surrounds the storage tank. In accordance with NFPA 11 subsurface injection is not recommended for any tank having a floating roof.

The CFM is capable of producing expanded foam with an expansion ratio of between 2:1 to 4:1. It is designed to discharge expanded foam against a back pressure, which can be as high as 40% of the operating inlet pressure of the CFM.  A minimum of 100-psi inlet pressure at the CFM is recommended for satisfactory operation.

The CFM is suitable for use with various types of foam solution generating devices.  These include bladder tanks, balanced pressure foam pump proportioning systems, in-line balanced pressure proportioning units and foam pumper trucks. Unless high water pressure is readily available, in-line eductorsare generally not suitable for use with sub-surface systems, because in-line eductors have a relatively high-pressure loss through the eductor. The residual pressure available on the discharge side of the eductor is often not high enough to ensure correct operation of the CFM and overcome friction loss in the piping and head pressure of the product stored within the storage tank.

2. Rim Seal Foam Pourer

The Chemguard Rim Seal Foam Pourer is designed as an air-aspirating discharge device used principally for seal area protection of open top floating roof tanks. The foam is aspirated as it travels through the foam maker, and then the Foam Pourer discharges the aspirated foam so that it gently slides down inside of the tank shell and directly in the rim seal area. Since the Rim Seal Foam Pourer is an air-aspirating device, it can be used with all types of foam concentrates, such as protein, fluoroprotein, AFFF and AR-AFFF. The foam/water solution is piped to the Foam Pourer from a remote proportioning device outside of the hazard area. An orifice plate is installed at the foam maker inlet to provide the required flow at the desired operating pressure. The Foam Pourer is typically installed on the top angle of the tank shell. The unit is usually bolted to the tank, therefore eliminating the need for welding and “hot work” permits.

3. Foam Maker

The Chemguard Foam Maker is designed as an air-aspirating discharge device used principally for the protection of open floating roof storage tanks and dike protection systems. These devices are used in various types of proportioning systems such as bladder tanks, balanced pressure pump proportioning systems or line proportioners.  The Foam Maker is normally installed in the line of a semi-fixed or fixed foam fire protection system.  The Foam Makers are used with appropriate Chemguard foam agents for the flammable liquid being protected. Chemguard Foam Makers are UL Listed for certain flow rates and pressures

Tiêu đề
Hotline hỗ trợ: +84(24) 3793 1355/3783 4392
|
Số lượng

Sản phẩm đã xem

0₫ 0₫